RM-CR Remote Conference Processor

RM-CR
Dimensions W215 mm × D260 mm × H44 mm
Weight 1.6 kg
Power Requirements PoE+ (IEEE 802.3at, LLDP), DC 48 V
Power consumption (max) 15.0 W
Connector RJ 45, USB, XLR balanced, RCA
In Operation Temperature 0~40 ℃
Humidity 30 %~90 % (No condensation)
Storage Temperature -20~60 ℃
Humidity 20 %~90 % (No condensation)
Indicator Power Indicator, Status Indicator, Bluetooth Indicator, Network Port Indicator (x3)
Mount Table Mount, Rack Mount
Maximum Device Number with RM-CR -
Accessories Installation Manual, USB Cable (A-B) 5 m (16.4 ft), USB Cable (A-microB) 1 m (3.3 ft), 4x Rubber foot, Access Panel
Options RM-MTL: Table Mount Kit, RM-MRK: Rack Mount Kit
Ether1 Dante Audio/Dante Control, Remote Control, WebUI, PoE+
Ether2/Ether3 Corporate Network, Remote Control, SIP, WebUI
USB USB2.0, Network Class, WebUI, Fixed IP
Audio I/O Dante 16in/16out
USB USB2.0, Audio Class 1.0, Input: 2 ch, Output: 2 ch @48 kHz
Mic Input XLR balanced, Input 2 ch
AUX RCA unbalanced (Line Level), Input: 2 ch, Output: 2 ch
Speaker Out RCA unbalanced (Line Level), Output: 2 ch
Bluetooth Version Bluetooth 4.2
Supported Profiles HFP (1.6), A2DP, AVRCP
Supported Codec CVSD, SBC, mSBC
Wireless Output Class2
Maximum Communication Distance 10 m (32.8 ft) (no obstacles)
Radio Frequency (Operational Frequency) 2,402 to 2,480 MHz
Maximum Output Power (EIRP) 4.0 dBm (2.5 mW)
SIP Call Handling Dial, Answer, Hold, Resume, Forwarding, Do not disturb, Call ID, Voice Mail Notifications (switch configured)
Call Bridging Supports Bridging SIP, USB, BT and AUX Calls. Join, Split, Hold, Resume, 5+1 Lines: Up to 2 SIP calls, 1 USB call, 1 Bluetooth Call, 1 AUX, plus the user
Codecs G.711, G.722HD, G.729ab, G.726
DTMF Support RTP event, SIP in-band, SIP info package
Security SRTP Support (RFC 1889), IETF SIP support(RFC 3261 and companion RFCs)
Sampling Rate 48 kHz
Bit Depth 24 bit
Latency 8 [ms] (Dante In to USB Out, includes signal processing)
Frequency Response 20 Hz – 20 kHz

Connection interface

External View